• Skip to primary navigation
  • Skip to main content
Reduction LLC

Have a Question?1-585-329-9718

  • Home
  • Run/Dry Evaporators
    • Electric Models
    • Gas Models
    • Accessories
  • Free Wastewater Evaluation
  • Industries
  • Contact
You are here: Home / Run/Dry Evaporators / Electric Models / RE7 Thermal
RE7 Thermal

RE7 Thermal

Description

4.6 Gallons/Hour – High Efficiency

Reduction RE7 Electric Run Dry Wastewater Evaporators offer economical solutions for aqueous waste water disposal processing up to 4.6 gallons per hour. The RE7 Wastewater Evaporator can be run until dry without damaging the unit, and it completely evaporates the wastewater to reduce the waste stream to a fraction of the original volume.

These highly efficient wastewater disposal evaporators are very easy to install and operate and have a fully automatic option that also provides for off-peak electrical rate usage if available in your area.

The RE7 Run Dry Wastewater Evaporator 60 gallon/227 liter evaporation chamber is constructed of 316L stainless steel, but can also be fabricated in a selection of other materials depending on the nature of your wastewater disposal stream.

The RE7 is a “Run Dry” unit that can be run until dry without damaging the unit and completely evaporates the wastewater to reduce the waste stream to a fraction of the original volume. A fully automatic option is available.

Options for Reduction Wastewater Evaporators include:

Clean out trays, spreader bars, advancing media filters, condensers for water recovery and custom accessories.

All Reduction LLC evaporators and accessories are free standing. Installation is plug and play for a fast and easy start up.

  • Specifications
  • Advantages
  • Applications

Specifications

Models
Manual Fill And Automatic Options

Evaporation Rate
Up to 4.6 Gallons/Hr.
The evaporation rates are estimates based air at 70°F for automatic operation, water at boiling point for one hour in batch operation (solids or floating oil build-up in evaporation chamber will reduce rate).

Dimensions (L/W/H)
48 x 37 x 40″ (Excluding stack)

Maximum Tank Capacity
60 Gallons

Heating Fluid
45 Gallons

Electrical Requirement
208, 240 and 480V/3 Phase 15KW

Single phase and other voltages also available, contact Reduction for more information

Weight Including Heat Transfer Fluid
948 lbs.

Heating Chamber
High Tech Insulation

Advantages

  • Fast Payback/ROI
  • Run Dry-Run Dry Without Damage
  • Up To 99% Waste Stream Reduction
  • Fast Installation
  • Easy Operation And Cleaning
  • Exhaust Draft Induction Fan
  • Insulated Double Boiler Design With Heat Transfer Fluid For High Efficiency, Exceptional Thermal Transfer
  • Multiple Safety Features
  • Wettable Surfaces
    316L Stainless Steel
    (Other materials available)
  • 316L Stainless Steel Tank Standard
    AL6XN And Other Corrosion Resistant Materials Available
  • No Sewer Connection Required
  • No NPDES Discharge Permits Needed (always check with local agencies before purchasing)
  • 2-Year Limited Warranty

Applications

  • Parts Washing
  • Printing Inks/Dyes
  • Vehicle Washes
  • Photo Processing
  • Metal Fabrication
  • Metal Finishing/Plating
  • Floor Scrubbing Water
  • Marina Bilge Water
  • Air Condensation
  • Ceramic Coating Wastes
  • Compressor Condensate
  • Degreasing Operations
  • Screw Machine Shops
  • Truck/ Car Washes
  • Coolants
  • Most Aqueous Waste Streams
 
Reduction LLC
  • Home
  • Run/Dry Evaporators
  • Contact Us

1-585-329-9718120 Triple Diamond Blvd Unit H | N Venice, FL 34275

© 2015-2023, All rights reserved | Site by Industrial Webworks