• Skip to primary navigation
  • Skip to main content
Reduction LLC

Have a Question?1-585-329-9718

  • Home
  • Run/Dry Evaporators
    • Electric Models
    • Gas Models
    • Accessories
  • Free Wastewater Evaluation
  • Industries
  • Contact
You are here: Home / Run/Dry Evaporators / Electric Models / RE2 – 1.5 GPH Wastewater Evaporator
RE2 – 1.5 GPH Wastewater Evaporator

RE2 – 1.5 GPH Wastewater Evaporator

1.5 Gallons/Hour – High Efficiency

The RE 2 Electric Run Dry Wastewater Evaporator is an economical solution for disposing of aqueous waste water streams up to 1.5 gallons per hour.

The RE 2 Wastewater Evaporator can be run until dry without damaging the unit, and it completely evaporates the wastewater to reduce the waste stream to a fraction of the original volume.

This highly efficient wastewater disposal evaporator is easy to install and operate and has a fully automatic option that also provides for off-peak electrical rate usage if available in your area.

The RE 2 Run Dry evaporator chamber is constructed of 316L stainless steel, but can also be fabricated in a selection of other materials depending on the nature of your wastewater disposal stream.

The RE 2 is Reduction LLC’s best “Run Dry” wastewater evaporator for small volume applications.

“Run Dry” means the evaporator can be run until dry without damaging the unit, completely drying most waste streams to a fraction of the original volume. The RE 2 has an ON/OFF switch, temperature dial and redundant safety shut-off thermostats, and a fully automatic option is available.

Options for Reduction LLC’s Wastewater Evaporators include:

Clean out trays, spreader bars, advancing media filters, condensers for water recovery and custom accessories.

Description

  • Specifications
  • Advantages
  • Applications

Specifications

Operating Type
Manual Fill/Run Dry, Automatic Option Available

Evaporation Rate
Up to 1.5 Gallons/hr
The evaporation rates are estimates based air at 70°F for automatic operation, water at boiling point for one hour in batch operation (solids or floating oil build-up in evaporation chamber will reduce rate).

Typical Operating Power
5 KW

Dimensions (L/W/H)
25x25x28″/64x64x71cm
(excluding stack)

Weight—Including Heat Transfer Fluid
550 lbs/198kg

Maximum Tank Capacity
16 Gallons/60 Liters

Evaporation Chamber
16x16x16 in/41x41x41 cm

Electrical Requirement
220 Volts, Single Phase, 5KW

Heat Transfer Fluid
11 Gallons

Advantages

  • Fast Payback/ROI
  • Run Dry-Run Dry Without Damage
  • Up To 99% Waste Stream Reduction
  • Fast Installation
  • Easy Operation And Cleaning
  • Exhaust Draft Induction Fan
  • Insulated Double Boiler Design With Heat Transfer Fluid For High Efficiency, Exceptional Thermal Transfer
  • Multiple Safety Features
  • Wettable Surfaces
    316L Stainless Steel
    (Other materials available)
  • 316L Stainless Steel Tank Standard
    AL6XN And Other Corrosion Resistant Materials Available
  • No Sewer Connection Required
  • No NPDES Discharge Permits Needed (always check with local agencies before purchasing)
  • 2-Year Limited Warranty

Applications

The RE 2 is perfect for waste streams from these applications and more:

  • Parts Washing
  • Printing Inks/Dyes
  • Vehicle Washes
  • Photo Processing
  • Metal Fabrication
  • Metal Finishing/Plating
  • Floor Scrubbing Water
  • Marina Bilge Water
  • Air Condensation
  • Ceramic Coating Wastes
  • Compressor Condensate
  • Degreasing Operations
  • Screw Machine Shops
  • Truck/ Car Washes
  • Coolants
  • Most Aqueous Waste Streams
 
Reduction LLC

RUNDRY™ is a trademark of Draygon, LLC. All Rights Reserved.

  • Home
  • Run/Dry Evaporators
  • Contact Us

1-585-329-9718131 Valenza Loop | N Venice, FL 34275

© 2015-2023, All rights reserved | Site by Industrial Webworks